0

LDPE FILM 98/2 BALES

$0.00

On 2Lians, we accept these payment terms:

T/T: A telegraphic transfer (T/T) is an electronic method of transferring funds utilized primarily for overseas wire transactions. Telegraphic transfers are also known as telex transfers, abbreviated T/T; T/Ts can also refer to other types of transfers.

L/C: An L/C at sight is a letter of credit (L/C) that is payable immediately – within five to ten days – after the seller meets the requirements of the letter of credit.

   Place of OriginJapan, US, Europe
   MaterialLDPE/HDPE/LLDPE Film
   Original ProductLDPE/HDPE/LLDPE Film
   ColorNatural, White, Mix Color
   GradeFilm
   TypePost Industrial Waste
   ApplicationFilm
   AppearanceFilm and bag
   Supply Ability500 Metric Tons per Month
   Processing Time15 - 20 days
   PackagingBales
   Est. Shipping Time

15, 30, 45 days

   Price

340 USD/MT FOB THESSALONIKI PORT – GREECE.

   Properties

Post commercial and post industrial.
Foreign bodies aprox. 1-2% (paper, stickers, tapes etc.), moisture aprox. 1-2% (open storage).
Can load in 1x40’HC container aprox. 26 MT (± 10%).
At that time available aprox. 15 - 20 x 40’HC containers.


LDPE FILM (98/2) BALES

If we use plastics commonly without  recycling in large quantities which can have a hazardous impact on health and environment. Plastics are produced from crude oil which is a non-renewable resource and creates a pressure on it. When the plastic is not recycled it will b dumped as landfill which coRecycling Process

hile the plastics are heated they turn from solid to gummy liquid and finally to the fluid as heating temperature is further increased. The melting point of LDPE is around 115°celsius which allows a process of ‘float- and- sink’ to separate low-density polyethylene polymer from other polymer materials. The separation process is carried out in a tank using water. As the recycling process ends the polymer liquid material are converted in form of plastic sheets which are sold to manufacturers to produce recycled materials.nsumes green spaces.

Low-density polyethylenes are produced commercially at high pressures in processes employing either tubular or autoclave reactors. In this report two conventional processes, one employing a tubular reactor and one employing an autoclave, have been evaluated. In additional, a process is evaluated that employs gamma-radiation-induced polymerization.

Recyclability

LDPE products are recyclable in most communities and  most of the LDPE products are reusable and will last a long time under typical lab conditions if used appropriately, but you can recycle them at the end of their lifetime as long as they are thoroughly cleaned for safe handling.




Promotion products