LDPE Film On Bales 98/2


On 2Lians, we accept these payment terms:

T/T: A telegraphic transfer (T/T) is an electronic method of transferring funds utilized primarily for overseas wire transactions. Telegraphic transfers are also known as telex transfers, abbreviated T/T; T/Ts can also refer to other types of transfers.

L/C: An L/C at sight is a letter of credit (L/C) that is payable immediately – within five to ten days – after the seller meets the requirements of the letter of credit.

   Place of OriginJapan, US, Europe
   MaterialLDPE/HDPE/LLDPE Film
   ColorNatural, White, Mix Color
   TypePost Industrial Waste
   AppearanceFilm and bag
   Supply Ability500 Metric Tons per Month
   Processing Time15 - 20 days
   Quantity2-4 loads/month


LDPE Film On Bales 98/2

LDPE is a thermoplastic which is obtained from petroleum. It is a semi-rigid and translucent polymer. It has a density of 0.910-0.930g/cm3. The LDPE structure consists of bundled polymer chains which are placed in an irregular shape. It is perfectly flexible, it can be used at the temperature between −50 °C and 80 °C.

The melting point of LDPE plastic is about 120 °C.It is generally used for trays and pots, long life bags and sacks, poly tunnels, protective sheeting, food bags etc. It is also used in wire & cable covering, computer parts such as disk drive, video cards. shrink wrap and container lids.

The effect of gamma radiation (doses 5–60 kGy) on the thermal, mechanical and permeation properties, as well as on IR-spectra of experimental five-layer food packaging films were studied. Films contained a middle buried layer of recycled low-density polyethylene (LDPE) comprising 25–50% by weight of the multilayer structure. Representative films containing 100% virgin LDPE as the buried layer were taken as controls.


LDPE/HDPE/LLDPE Film Scrap, A grade 99/1, B grade 98/2, Natural/Clear color, White Printed Color, Mix-Color

Results showed that the percentage of recycled LDPE in the multilayer structure did not significantly () affect the melting temperature, tensile strength, percent elongation at break, Young's modulus, oxygen, carbon dioxide and water vapour transmission rate values and the IR-spectra of the non-irradiated and irradiated multilayer films.

Irradiation (mainly the higher dose of 60 kGy) induced certain small, but statistically significant () differences in the mechanical properties of multilayer films (with or without recycled LDPE layer) while no significant differences were observed in the thermal properties and in the gas and water vapour permeability of multilayer films.

Related products LDPE Film On Bales 98/2

LDPE/HDPE/LLDPE Film Scrap, A grade 99/1, B grade 98/2, Natural/Clear color, White Printed Color, Mix-Color.
Low-Density Polyethylene (LDPE) Film Scraps Lumps Recycled Regrind Natural
LDPE Film Grade 95/5 Film Roll Scrap
Recycled Pellets LDPE Film grade recycle plastic scrap
LDPE regrind natural injection plastic Scrap
LDPE Scrap Rolls Mix Color From Industrial Waste
Recycled Pellets LDPE Film grade recycle plastic scrap
LDPE black color recycle plastic scrap
LDPE Plastic Scrap Film Grade 60/40
LDPE Film Grade 98/2 film plastic scrap
HDPE Virgin Resin Granules Off Grade Resin Granules

Promotion products