Buyer Guides
rPET vs rHDPE vs rPP vs PVC: Choosing the Right Recycled Grade?
Ask five buyers what "recycled plastic" means and you will get five different answers, because the polymer decides almost everything: where the material can be used, what can go wrong with it, and how tightly it has to be specified. Picking the wrong grade is rarely a price problem. It is a fit problem, and it shows up later as a failed production run.
This guide sets out how the four grades we trade most — rPET, rHDPE, rPP and PVC — differ in practice, and what a buyer should pin down for each before placing an order.
The four grades at a glance
Grade | Typical sources | Typical end uses | Main quality watch-points |
rPET | Post-consumer bottles; thermoforms | Fibre and strapping, sheet and thermoforms, bottle-grade where food-contact approval applies | Colour, PVC and glue contamination, moisture, intrinsic viscosity |
rHDPE | Bottles, caps, crates, drums | Pipes, bottles for non-food use, crates, pallets, film | Odour, colour, melt flow range, cross-contamination with PP |
rPP | Crates, caps, battery cases, woven bags, injection scrap | Injection-moulded parts, automotive and appliance compounds, crates | Melt flow range, PE contamination, ash and filler content |
PVC | Pipe, profile, cable and window offcuts | Pipes, profiles, cable sheathing, flooring | Stabiliser type, rigid vs flexible, plasticiser content, foreign polymers |
1. rPET: the most standardised, and the most demanding
PET is the best-organised recycled stream because bottle collection is mature in many markets. That makes rPET easier to specify, but also easier to over-specify. Fibre and strapping applications tolerate more colour and variation. Food-contact applications require material from an approved process and documentation to match, and that is a different product at a different price, not a better version of the same flake.
What to specify: form (bales, flakes or pellets), colour split, maximum PVC and polyolefin content, moisture, and intrinsic viscosity for pellets.
2. rHDPE: colour and odour decide the price
rHDPE is forgiving on mechanical performance and unforgiving on appearance and smell. Natural (uncoloured) material commands a premium because it can be coloured freely. Mixed colour is cheaper but limits the end use. Odour from previous contents, such as detergents, is the most common complaint, so ask how the material was washed and request a sample you can actually smell.
What to specify: natural vs coloured, melt flow range, PP contamination limit, odour expectation and wash level.
3. rPP: melt flow is the specification
Polypropylene covers an enormous range of melt flow rates, and a converter's machine is set up for one of them. Two lots both labelled "rPP" can behave completely differently on the same line. Treat melt flow range as a hard requirement, not a footnote, and check ash content if the material comes from filled or compounded sources.
What to specify: melt flow range, colour, source (crates, caps, injection scrap), PE contamination limit and ash content.
4. PVC: know whether it is rigid or flexible
Recycled PVC splits into rigid (pipe, window profile) and flexible (cable, flooring), and the two are not interchangeable. Additive packages matter too, since stabiliser systems differ by source and region. Keep it clean of other polymers, because even small amounts of PET or polyolefins cause problems in processing.
What to specify: rigid or flexible, source, colour, foreign-polymer limit and any restrictions on stabiliser type your market applies.
A simple way to choose
Start from the end product, not the polymer. What will the material become, and who will test it?
Write the processing window: melt flow, moisture, colour tolerance.
Decide what you will not accept: contaminants, odour, colour drift.
Then ask for offers. Price comparisons only make sense between lots that meet the same written spec.
How 2Lians helps
2Lians Recycling buys and resells rPET, rHDPE, rPP, PVC and other recycled grades across Asia, the Middle East, the US, India and Vietnam. Tell us the application and the processing window, and we will tell you which of the lots we can supply fits — and which does not.
Need a specific grade? Write to info@2lians.com or message us on WhatsApp at +65 8027 8585 with your target spec.

𝟐𝐋𝐈𝐀𝐍𝐒 𝐑𝐄𝐂𝐘𝐂𝐋𝐈𝐍𝐆 𝐏𝐓𝐄. 𝐋𝐓𝐃.
Add: 111 North Bridge Road #08-18, Peninsula Plaza, Singapore 179098.
Email: info@2lians.com
Whatsapp: +65 8027 8585
𝐉𝐨𝐢𝐧 𝐰𝐢𝐭𝐡 𝐮𝐬 𝐟𝐨𝐫 𝐭𝐡𝐞 𝐧𝐞𝐰𝐞𝐬𝐭 𝐮𝐩𝐝𝐚𝐭𝐞𝐝:

